Are you searching for a best lift manufacturer in Chennai? Then We can help you to resolve your queries in best way. Vini elevators are the best lift manufacturer company. Also Vini elevators are the best lift installer across south India. And so Our final product output achieves best quality with affordable cost. Our end users fully satisfied with our new lift installation and service.

Although Best Quality is vini elevators key point.  So We can deliver the best lift with effective cost. And so We have installed more number of new lift across Chennai area. The first thing to do is to carry out an assessment of the building and determine what you need the elevator for. Are you having any queries about basic factors to be consider for new lift? then also read : best home lift in Chennai.

Before your install an elevator in your multi-story building, you must know the building’s dynamics. Is it a residential or commercial building? You should also know how much the elevator needed for your structure will cost.

Even though elevators can be an expensive investment, the accessibility and ease of use is often a fascinating reason to add one to your next structure. Depending on the type of building, some elevators equipped with special functions such as space for holding stretchers in a hospital building. There are some types of elevators:

• Machine room (MR) Elevator
• Geared and Gear-less Traction Elevator
• Machine Room less (MRL) Elevator
• Hydraulic Elevator
• Vacuum (Air Driven) Home Elevator
• GOODS Elevator

Machine room (MR) Elevator

The Machine Room has equipment that is critical for the function of your unit. It does not require a separate room for home elevator. The equipment can be located in a room with other home services. When planning for your home elevator, find the best place to locate the Machine Room will help your elevator run more efficiently. Locating your Machine Room at the lowest landing, adjacent to the equipment will help your elevator run more efficiently. If you short on space then you can order your home elevator with a slimmer tank and create a small closet in the lowest landing opposite the elevator and create your Machine Room there.

Geared and Gear-less Traction Elevator

Traction Elevator

This elevator has ropes that pass over a wheel attached to an electric motor located above the shaft. But here the main function of the ropes is to raise and lower the elevator car. It used for both mid and high-rise applications and can travel much faster than hydraulic elevators.

Geared Traction Elevator

The geared elevator is made up of a motor that has a gearbox attached to it. The main function of the gears is to power the wheel that moves the ropes. and also this type of elevator can travel up to speeds of up to 500 feet per minute. Although, the maximum distance it can travel is 250 feet.

Machine Room less (MRL) Elevator

Most elevators designed with a machine room located above the elevator shaft. This type of elevator has a machine fitted in the override space, and it can only be accessed through the top of the elevator car whenever maintenance is required. So for, this type of elevator can only travel a distance of 250 feet with speeds of up to 500 feet per minute.

Hydraulic Elevator

Hydraulic elevators are normally given support by a bottom-placed piston. The purpose is to push the elevator car up while an electric motor forces hydraulic fluid down the piston. When it’s time for the elevator to come down, the valve releases the hydraulic fluid from the piston. therefore this type of elevator mostly used in 2 to 8 story buildings and also it can only travel at a maximum speed of 200 ft. per minute.

Vacuum (Air Driven) Home Elevator

For a residential applications purpose only using this type of elevator . It allows for a single passenger to a three passenger wheelchair accessible model. Therefore, Vacuum elevators do not use any cables or pulley system to operate. Hence these Air-Driven elevators operate based on the natural laws of physics.

GOODS Elevator

Goods Lifts used for lifting heavy or light industrial material. These lifts fitted with shutters and installed with hoists, push buttons and switches. Specially designed for various industrial applications, these lifts renowned for optimum performance with low maintenance.

 Our Services

• Lift Manufacturers (MR/MRL/ HYDRAULIC/GOODS)
• Lift Maintenance Services (Monthly/ Yearly)
• Lift Repair Services
• Lift Modernization Services

Our Products

• Home Lift
• Passenger Lift
• Hospital Lift
• Capsule Lift
• Goods Lift
• Commercial Lift
• Residential Lift
• Hydraulic Lift
• Industrial Lift
• Car Lift

Contact Us

• Mobile :- +91 75989 34699
• Email :- [email protected], [email protected]
• Our Product Details

VINI Elevators is providing best Home lift in Chennai, What is the use of elevator? lift, car that moves in a vertical shaft to carry passengers between the levels of a multistory building. Are you looking for a best Lift for your home? Do you have any confusion about to select a best lift for your dreamed house?

Do you really want to know the basic factors to be considered when choosing a lift for your home? Then this article shows that what are the basics of Home lift comes with separate requirements, limitations, and challenges.

A lift for home comes in various lift sizes, types, and designs. Working in close coordination with the clients, consultants, architects, and the manufacturing company offer the best results.

Home Lift in Chennai

In construction, these are the backbone of a building, providing support for the layout, as well as access and transportation.

Residential or Home elevators offer the authority to design and arrange them in multiple layouts.

The process of planning, installation, and arrangement will finally prove to be beneficial regardless of location.

With these following detailed elements focusing on lift designing & installation

• before all, It is important to focus on the arrangement.

To ensure that there is no interference between passengers entering and exiting the car. Then only It should be planned carefully to obtain maximum efficiency.

• It is important to ensure optimal usage and short waiting time.

Systems with a different number of lift cars have different dimensions as well.

• Also, It is important to give attention to the regulations and guidelines related to the installation of the place, city, and state you are working in.

so the professionals will find the required assistance in planning, designing, and installing them exactly.

The Vini elevators are the best place to fulfill your lift needs. And also We offer best variety of lifts according to your home structure.

collective or Group- automatic operation in Lift

Most modern elevators are automatic, using various control systems to operate elevators individually or in groups. Collective operation is popular for use with a single elevator in a building. The car answers all calls in one direction in sequence and then reverses and answers all calls in the opposite direction. So it is used in larger apartments, hospitals, and small office buildings. A variation, called two-car or duplex collective, permits two cars to operate together and then share calls between them

Group-automatic operation controls two or more cars as a group, keeping them timed to operate within a specified operating interval.

What are factors to be consider when choosing a lift for your home?

Home Lift planning

1. The type of building

It is important to take into account predicting the usage, especially during peak hours. This significantly impacts your decision of how many lifts you require, their type, location, size, arrangement, dimensions, and speed. And also a uniform arrival or departure pattern can be used for planning lifts.

2. A deep car or a wide car Capacity

When choosing a specific car, a choice has to be made as to whether the car is selected as a deep car or a wide car as per the lift dimensions. And so Wide cars are preferable to deep cars as they provide better passenger transfer and achieve higher car capacities. Also Deep cars are suitable for wheelchair users. Similarly, open cars serve the dual purpose of carrying passengers as well as for the movement of goods.

Before above all,you should decide the ideal dimensions for the lift shaft and the machine room, pit depth, and headroom.

Function                      Capacity (lbs.)                Min. speed (ft. /min.)           Building height (ft.)

Residential

2000 2500

100 200 250-300 350-400

0-75 76-125 126-200 >200

3. The handling capacity or Quantity of Service

The quantity of service is best reflected by the number of passengers moved to their destination.

This is measured considering the number of passengers handled during five minutes each of the peak periods of the day. Therefore,to increase the handling capacity, reduce the number of stops. Hence round trip time reduces. And also reducing the waiting interval

4. Quality of service

The quality of service is measured in the interval between the arrivals. It reflects the passenger waiting time for various floors and is also called waiting interval.

Time taken	Quality of service
20-25 seconds	Excellent
30-35 seconds	Good
35-40 seconds	Fair

5. Speed

The speed is dependent upon the quality and quantity of service. Additionally, the motor needs to be sized based on the capacity and the speed.

6. User behavior

Similarly The people, who use the lift, are relevant in its choice.

7. Lift space

If you already have an existing shaft, it also remains best to ask vini elevators, the manufacturing company to conduct a site survey and recommend the best product.

A normal passenger lift needs a pit depth of at least 1100 mm and headroom of 3400 mm. However, if you do have a pit space, you can fit a ramp instead with some extra space on the lowest floor of your building.

8. Type of Drive system

A decision has then to be made regarding the type of drive. Following are a few options available:-

• Hydraulic
• Traction
• Machine room-less (MRL)

Hydraulic home lift

Machine room-less (MRL) home lift

Traction home lift

9. Safety

It is important to ensure that the machine complies with fire and safety standards. In order to comply with fire regulations, it needs fire-rated doors, a backup power supply, a larger car, set speeds, an internal communication system, and built-in water protection for firefighting run-off.

10. Budget

Before execution of a new lift, request a quotation from a manufacturing company. This is especially important if the lift has any special features like low noise, high-level finishing, etc., or is a completely non-standardized product.

Home Lift arrangement

The right positing of the lift also plays a major role in determining the smooth functioning of the lift.

There are three main positions of a lift in a building.

Inside the building

• In the stairwell, if it is large enough to accommodate a lift.
• By creating a new interior shaft in a position independent of the stairs in spacious areas with small stairways.

Outside the building

• On the outside wall with access to the building landing through an interior or exterior public area.
• Adjacent to the doorway, rebuilding the entrance through an existing doorway.

Next to the staircase

Vini elevators ,as a professional its our job to identify the best arrangement for lift in your building.

Initially, the placement of a lift between the staircase or adjacent to it was a preferred choice. However, it posed a threat to safety in case of a fire outbreak. Therefore now a days lifts are placed near the staircase and not attached to it. Better to choose an easily accessible, clear and open space for lift positioning.

Space requirement

It is important to consider the space requirements while planning and selecting lifts. It is necessary to clearly specify the lift dimensions.

Dimensions of lifts

Some important factors to be considered like safety, quality, the capacity during peak times, and the type of building in which the elevator is to be installed.A common residential lift is usually 3’ wide by 4’ deep or 0.91 x 1.22 m in dimensions. The door width is usually 36 inches or 0.91 m.

Conclusion

In conclusion, If you are looking for a lift in your home, you need to consider the above factors and then make it happen. There are several options on the market, so you’ll need to discuss your needs with a vini elevators who can offer you more information on making your final choice.

Finally as a manulacturing company, vini elevators provide you all the information regarding new lift installation with your requirements. As well as we can help you to select the right installation for your needs.. Contact and reach us today for more information.

Our Services

• Lift Manufacturers (MR/MRL/ HYDRAULIC/GOODS)
• Lift Maintenance Services (Monthly/ Yearly)
• Lift Repair Services
• Lift Modernization Services

Our Products

• Home Lift
• Passenger Lift
• Hospital Lift
• Capsule Lift
• Goods Lift
• Commercial Lift
• Residential Lift
• Hydraulic Lift
• Industrial Lift
• Car Lift

Contact Us

• Mobile :- +91 75989 34699
• Email :- [email protected], [email protected]
• Our Product Details